Skip to main content

SRAM eTap Groupset

SRAM eTap Groupset
This item is currently not available.

Details

All of the underlying tech in the new SRAM RED® eTap groupset such as wireless shifting, advanced battery power management and mechatronics technologies are all meant to serve one ultimate purpose, to facilitate the most intuitive and consistent shifting available. This shift logic is called eTap. Right lever makes it harder, left lever makes it easier, both levers shift the front derailleur. Simple, unmistakable, and intuitive.

SRAM Yaw™ technology changed front shifting forever, eliminating the need for trim. The SRAM RED® eTap Front Derailleur makes a good thing better by executing front shifts confidently and quickly over our proprietary wireless communication protocol. The eTap shifter optimizes Yaw adjustments as needed throughout the shift range with no need for rider input.

  • Wireless connection via AIREA™ network for fast and clean installation
  • Braze-on / clamp adaptor
  • Designed to work with SRAM X-GlideR™ 11-speed chainrings

The SRAM RED® eTap rear derailleur executes shifts the instant you demand it, with military precision. Wirelessly. It’s easy to set up, clean in appearance and delightfully uncomplicated. Mechanical necessities such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a 238g (with battery) shifting wonder.

  • Wireless connection via AIREA™ network for fast and clean installation
  • Designed to work with SRAM PowerGlide™ and PowerdomeX™ cassettes

SRAM RED® eTap features race-car-inspired paddle shift logic that virtually eliminates mistaking upshifts for downshifts, while keeping shifting precise, fast, and easy. It’s a logic that is simplified for speed: right lever makes it harder, left lever makes it easier, both levers to change the front ring. Our revised ErgoFit™ controls seamlessly connect rider and machine with Reach Adjust™ to fit any hand. You’ll shift more, with less effort and spend less time doing it. Carbon ErgoBlade™ levers and large SRAM eTap paddles provide positive controls for rider input.

  • Wireless connection via AIREA™ network for fast and clean installation
  • Revised ErgoBlade levers provide confident control
  • eTap logic and positive feedback paddles eliminate shifting mistakes

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.

  • Limitless remote shifting positions for drop and aero bars
  • Compatible with SRAM RED® eTap shift/brake controls

  • Use to keep Blips in place on handlebars
  • Fits 31.8mm round portion of drop bar
  • Clamp mounts directly to bar outside of tape zone
  • Ideal for use with thumbs or index fingers while hands are on the tops
  • Right and left specific, just like Blips

External Blip mount for aero extensions and base bars

  • 360 degree rotation for adjustment
  • Aero use only to fit 22.2mm OD bar 65mm in length
  • Fits all Zipp aero extensions and base bars
  • Blips not included

BlipBox™ is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED® eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA™, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position.

  • BlipBox mount included
  • Replaces standard drop bar shift levers
  • Limitless aero configurations
  • Up to two positions per side
  • Fits a standard Garmin mount or the included mount

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.

  • Up to 1000 kilometers of riding per charge

eTap batteries are literally a snap to remove and charge.

Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor.

A full charge takes just 45 minutes to complete.

Videos

The Right Questions

Reviews